USX Mount Full Motion TV Wall Mount for Most 42-86 inch Flat Screen/LED/4K, TV Mount Bracket Dual Swivel Articulating Tilt 6 Arms, Fits 8” 12” 16" Wood Studs,Max VESA 600x400mm, Holds up to 132lbs

When I ordered my 65" flat screen TV, I knew that I would need a substantial support to mount in on the wall of my home theater. This USX Mount Full Motion TV Wall Mount appeared to be up to the job of supporting my TV's 52 pounds, so I ordered it at the same time. The mount and the TV arrived on the same day.Anything representing that much weight must, of course, be mounted directly on wall studs and not just on wall board. If the wall is masonry, then masonry anchors must be used. Fortunately I had a stud-finder that I had acquired from Amazon several years ago. It located the appropriate wall studs. After taking careful measurements and using the supplied template, I drilled pilot holes through the wallboard and into the studs and used the four included metric lag bolts to secure the base of this wall mount solidly into the studs with my powerful impact tool.All screws required for assembly were included in plastic enclosures including some extras. The brackets that mounted on the back of my TV aligned perfectly with the screw holes that were on the TV. Once the two parts of this mount were properly attached. my wife and I lifted the TV and used the hook brackets to easily secure the TV over the two parallel horizontal bars. Once that was done all of the TV's weight was on the bracket. Flipping up a couple of hinged brackets and tightening the included screws, ensured that the TV could not be accidentally jarred loose from the mount.The entire mount installation turned out to be far less of a hassle than we anticipated. The articulating hinges on the mount enable me to smoothly swing the TV away from the wall to almost any angle to easily gain access to the connections, then press the TV toward the wall for an amazingly flush mount. Another adjustment allows tilting the screen downward if I had mounted the TV high on the wall to make it less accessible.If you are looking for a hassle-free wall mount for a large, heavy TV up to its stated weight capacity, I believe this USX Mount Full Motion TV Wall Mount will do the job for you if you carefully follow its clear instructions.

I love this TV mount! It was easy to assemble, and easy to use! The quality and materials are great quality, and the price was worth it! The fact that I can move my Tv to any angle I want so that it is easy to attach cords and devices is the best part! It is versatile because it works with every place in the living room to watch TV and flexible in that I can move my TV to meet my watching needs and plug in my game consoles. I would highly recommend!

One problem I had with my previous mount for my 70” TV was seeing & reaching the HDMI inputs. This mount allows even very large TVs to be extended from the wall to easily reach them and arrange all my cords.I just upgraded to a 75” TV and purchased this well-made mount. Installation was straightforward using the supplied template. And you can make adjustments horizontally, forward/reward tilt, and left/right angle. This allowed me to mount to the studs even though they were not centered to my fireplace mantel. Highly recommend!

This thing is awesome. I was worried it wouldn't hold out 70 lb TV, but it's doing great. The install wasn't difficult, but if you have a 75 inch TV or bigger, you're going to need 3 ppl total. Two to hold ithe tv while one person screws the clasp and tightens the positioning screws. The swivel action is great for sun glare sneaking through the window.

Study, but the lean forward/backward bit is always just loose enough that my TV starts leaning forwards after a week or so. I have a TV that is on the heavier side but still within the advertised range. The rest of it is great quality though.

We needed to hang a 50 inch Samsung flat screen TV in our bedroom, as our old 32 inch Sharp was giving us problems. After reading the reviews for the USX TV wall mount I ordered one. As the reviews stated, everything needed to put our set up on the wall was included in the box. The materials are all very good quality and the installation instructions were thorough, clear and very helpful. The mount went up just as the instructions stated, with no surprises and no work-arounds necessary. I used the included "template" for locating the holes for the mounting screws in the wall, and that template was 100% accurate. Everything fit perfectly the first time. Once installed the mount is simply a super-strong, well-designed piece of work. The people involved in putting the kit together, drawing up the layout, creating the process for installation and getting it all down in a readable, understandable and workable manner really deserve praise (and maybe a big raise), as this was one of the best installation experiences I've ever had with a product. And the result isn't just a high quality TV wall mount, it's also flexible, usable and leaves you with a feeling that you can depend on the installation to keep the set up on the wall for good! Thank you USX for a great product!

Excellent product easy to put together I was able to speak to a representative to ensure the items were labeled correctly and the exact fit for my model tv Worked great Highly recommend

Installation was easy and instructions were good. It fits perfectly on two wall studs that are 16" apart. If your TV is large and will be off-center from those two studs, then you may need something beefier or with a 24" pattern. This was the case with mine and the company was very understanding in helping me get the right mounting device for my TV. I was very happy with the quality of the construction of the mount.