DuPontRubber Saver Gasket Seal Trim Conditioner, 25ml

I think it worked well.

Worked great. I had an ongoing squeak from the rear window on my bronco, applied this and gone immediately. Nice applicator and easy to use

This stuff saved me from having to replace my moonroof rubber seal (probably $200). Everyone was saying to use a silicone spray on your seals. Well, I did and the rubber got sticky. It was so bad that when I used the "tilt" button to raise it, there was a hard snap in the metal as it flexed because even just a few hours and it was as if I used glue. I tried everything to get rid of the stickyness--other silicone lubes, dry lubricant, and even just cleaned it with isopropyl. But nothing helped. Finally I heard about this Dupont Seal Saver which came highly recommended. I cleaned the seal all the way around once more with isopropyl and then put on a thick layer of Seal Saver. 5 minutes later, the subroof was opening and closing as it had been before I fell for the stupid idea of silicone. I went crazy with the stuff and applied it to the door and trunk seals after that, and I've been applying it for the last 3 years. It really soaks into the foam rubber seals too and keeps it soft. When I open my car door, the seal expands back to its natural form instead if staying flat like it was before I started applying Seal Saver.

Good product

When I first moved to Colorado 10 years ago, I brought a collector vehicle with me. While its rubber seals had held up for years on the Gulf coast, as soon as I brought it to our low humidity normal, the rubber and plastics both started to deteriorate, quickly.On my 2021 Ford Bronco, I had started to notice some new squeaks this spring that seemed to be coming from the windows and rear, and the passenger window had started sounding a little differently sealing up after closing the door.Time to clean and condition the seals. (Assuming your seals are already “clean” looking, as in not caked in mud) Take a decent microfiber cloth and some waterless wash (I like Adams Polishes waterless wash) and clean your seals. You’ll be surprised at how grimy that clean looking seal actually is. Wipe it down until clean and dried. Also clean the interior of your windows with a good glass cleaner (again I love Adam’s) and waterless wash the top edge of the swing gate too. Mine had some dirt clinging there as well.Next take a seal reviver product like DuPont seal saver and thoroughly apply to condition the seals following manufacturer instructions.Even though my Bronco is garaged etc, the seals really absorbed the seal saver nicely. Hit the rubber door seals, the seal around the swing gate, and for you hard top folks pay special attention to the rubber seal on and around the back glass. Also clean and apply to your hard top seals the next time you have your panels off.This absolutely cured the new squeaks I was hearing. Even though the 6th gen’s are still new, there are a lot of seals with failure potential - easier to apply some prevention once every 6 months or so than to chase leaks due to tired rubber. 🙂A lot of squeaks you might be thinking are coming from the swing gate hinges may well be coming from the seal.

Great stuff, easy to apply, helps with rattles, and squeaks, will be buying more , seems to last

Seems to work okay. Doesn't penetrate as fast as it I would have liked it to. Probably just a good option for conditioning seals. Not sure of any of their options out there but this will work for what it's used for.

Very good for brining drying weather seals back to life.