DOQAUS Ice Cube Trays 4 Pack, 40 pcs Silicone Ice Cubes Tray Maker with Spill-Resistant Removable Lid, Easy Release & Pop out, LFGB and BPA Free, Stackable Flexible, for Soup, Food, Cocktail, CoffeeGlobal Recycled StandardGlobal Recycled StandardGlobal Recycled Standard

These are awesome. The silicone cups at the bottoms of the trays make it super easy to get the ice out, and the lids make it so you can fill and stack several in the freezer at a time. These are the best (and some of the cheapest!) ice cube trays I've ever used!

Compact and easy to use! Good price and long lasting! The lids attach easily and stay attached for as long as necessary.I'd recommend this seller and this item.

Like most, I have an ice maker built into my fridge, but I much prefer using the water from my under sink water filtration system. Having gone through a litany of brittle plastic trays and gimmicky cube molds, I had resigned myself to either spilling half the water before reaching the freezer or cracking a tray every few weeks. These solve every problem you could have, the lids keep them covered from spilling, and easily stackable. The silicone base makes removing ice seamless, just gentle push from the bottom. Oh, and dishwasher safe.

The white interior made it difficult to see water level when filling, and the cubes were relatively small. But the cubes were easy to release and the lids are a nice bonus. Overall a good product until they began to leak after two years of use. I guess nothing lasts forever.

I love the ease of using these ice trays! They are easy to fill and come with lids so you can stack them in the freezer! The ice cubes are just the right size for glasses and cups

About 8 months ago my refrigerator ice maker was having problems. The frig. was quite high quality, but not it's ice maker, since the freezer temperature is controlled by the freezing compartments that are in the lower half of the frig., while the upper half, is for standard food & fluids, which is always set below freezing. However, the upper part of the frig., unfortunately also contains the "ice receptacle maker" which also delivers the cubes on demand. The freezing air it needs is blown into the upper frig. compartment ice maker from a freezing compartment in its lower half.After some 6 years of use, the frig. ice maker was giving me problems, since lower temperature, humid air was leaking into this compartment from the less than perfectly designed, silicone rubber side walls, that leads to much ice forming in the ice maker freezing component itself. I tried to fix this problem, but eventually the ice maker no longer made ice cubes. However, the dispenser tray still worked perfectly well- it just needed ice cubes. Voila! I found that I could fill the working frig. dispenser tray with ice cubes, made first, in an area of the lower freezer compartment. At first, I purchased an ice cube making tray set that could make up to about 70 smallish ice cubes, but they were difficult to get out of their single tray, due to the fact, that the entire ice maker tray was made of solid plastic, and some to many of the ice-cubes were difficult to release easily.So, I went back to Amazon & found another ice cube tray maker, that many readers were quite happy with. So about 6 months ago I purchased the above 4 tray set that is being reviewed herein. It turned out that this set is superbly designed, very easy to use, still functions 100% well, with no breakage of any plastic parts (but I do handle the parts. particularly the thin tray covers with care). Each single tray (of 4 such trays) makes 14 medium sized ice cubes x4 trays overall = 56 cubes in total. It takes about 800 cc to fill the 4 empty trays. What is so superb about these trays, is if you use them correctly, the ice-cubes are very, very easy to remove quickly. To re-fill them again with water for refreezing, takes only a couple of minutes. Their most important component of this ice making tray, is that the bottom of each cube compartment, is made of soft & pliable silicone rubber.Now, this is how I suggest using this set to optimize their function: 1) remove the trays from the frig. freezer compartment and bring them close to the kitchen sink; 2) then run for 2-3 seconds some hot water over the cover of the first tray; 3) then turn over to its bottom silicone side and run some hot water over the entire silicone area of 14 cubes; 4) then place the tray over a large enough receptacle (about 12x8"x2" in size) & twist the tray slightly to at most moderately, after which most, if not all, the cubes will fall into the receptacle; 5) turn over the tray, and if any cubes are left, simply push with a finger on the silicone rubber base to dislodge the remaining cube(s); 6) repeat this procedure for the remaining trays that you decide to use (my needs are for only 3 trays at a time, not four, since my frig. tray only holds 3 trays of cubes before over-fill); 7) next, put the ice cubes into the Frig. ice holder bin and place it back into its frig. bin compartment ASAP, to minimize ice cube melting; 8) refill your empty ice trays with your liquid of choice-- typically plain water. One last item-- The refilling of the trays with water. For this, I found an excellent item from from the "JOIE" Company, which is a 500 cc red & clear measuring cup (with cc and oz markings) that dispenses the water into the trays cube-slots easily and quickly. Fill each cube space to within 1-2 mm from the top of the tray to compensate for expansion of the volume of water after freezing.Hope you will enjoy using these excellently designed & practical ice tray makers, as much as I have, with several months of continuous use, without any damage to date.

My ice maker can't keep up with our ice intake so I bought these to help. One came with a tiny piece missing on the lid but not worth sending back for a replacement. Perfect cubes and the silicone makes it easy to remove. Only downside is I put them in and they didn't freeze in 10 hours. I think the lids make it take longer to freeze. I made more and separated them and they froze in 3 hours. All in all they work great!

The tabs on the tray tops break off almost immediately. The ice pops out of the trays easily which is definitely a plus. Even though the price was excellent, I probably would not buy again.