TUSITA Out Front Mount Compatible with Garmin Edge GPS Bike Computer, XOSS G/G+, iGPSPORT - Cycling Handlebar 25.4mm 31.8m

I initially purchased the mount as there was little room on my handlebars to place my Gamin Edge where I wanted it, on my gravel bike. The unit was easy to attach and I believe provides a more robust mount for the Edge. It also for better placement of the Edge (at least for me) a bit further out and up, in a better location to see when the radar (Garmin radar/tail light) indicates a car approaching from the rear. I was very pleased with it and bought addition mounts for my other bikes.

I bought this back in July 2021, and have ridden more than 1,000 miles of road and gravel trails. I use it to hold an Edge 130 Plus on the top, and a NiteRider Lumina 900 lamp using the GoPro adapter on the bottom.It's strong and sturdy, easy to mount, and I've had zero issues with it. The Garmin just snaps in and it holds it tightly. I have no concerns about it falling out, it's tight and not going anywhere. The mount itself is very strong, but also extremely lightweight. It's holds the headlight steady and could easily hold up even a heavier headlight. It's very durable.I've had it for over 9 months, it's in the same condition as when I bought it. I'm sure I'll be using it for several years since it has no noticeable wear on it. I even remove the light after most rides to charge it, and the GoPro mount is just as tight as it was on Day 1.I highly recommend it, it gives you everything that Garmin branded mount gives you, but at a much lower price. It has the benefit of the GoPro adapter if you ever need it without taking up extra space on your handlebars.

To me, this is no different than the name brand one, it works great and comes with seals which makes it much more likely to fit multiple sizes of handlebars. Stays sturdy and clicks in well with my bike computer.

Definitely Garmin compatible, my 840 fits fine. My 31mm bar with the thinner plastic shim was still too thick, even with a longer 4mm screw than supplied. Used a short section of bar tape instead and found the female screw end to not have an open end so finally filed off ~2mm of plastic on the underside of the hinged female end to open up the screw opening to the outside so the screw would not bottom out in the hole. This allowed the mount to tighten up so it would not slip on the bar. There is a metal insert in the female side of the mount. With the female end opened up the OEM SHCap screw might have worked ok; it appears to be stainless.

Initial Impressions : 11/13/23.I needed a new out front mount to replace the one that came with my Sigma Rox 12 bike computer (mount compatible with Garmin connector), with ability to also connect front light with GoPro connector.This mount has met my needs.The product appears sturdy and attached "firmly" to my Pro Vibe 31.8mm carbon handlebars. I was able to use the supplied screw/bolt to attach to the handlebar though it did take a little effort as others have commented on the screw/bolt length.The GoPro connector worked well and I was able to attach my front light and looks as if it should be easier to adjust the mount angle a lot easier than the oem mount I had been using previously due to the screw/bolt handle.All in all seems a great and cost effective solution for what I needed.I have done a few rides and the mount is working well, no movement or slipping.I will update this review if I encounter any issues.

I use the new COROS Dura computer and the COROS mount on my road bike. I needed a second mount for my fat tire bike and COROS does not currently sell their mount as a stand-alone. This one has worked great. It was just as easy to install and holds firm. Extra screws provide additional security if you need it, but I find with the elastic strap on the DURA looped on my handlebar I don't bother with it. My first COROS mount failed after three rides (the arm broke when going over a very rough patch of pavement). This mount is slightly shorter which should reduce the forces on it and prevent that from happening here. (COROS was great about the broken mount, they replaced it free of charge and continue to fiddle with the engineering, I'm told.) Maybe they will sell it direct once they have all the bugs worked out, but this one is great in the meantime.

This is pretty much a copy of the Garmin mount but with slight changes. The 2 extra screws they give you are most likely for the underside attachment. They are 5mm TOO short to fasten the mount to your handlebars. I used my longer mounting screw (right) from another handlebar mount and it attached just fine.PRO: 1) Rigid design 2) Solid computer attachment 3) Included GoPro mount & thumb screw 4) Reverse hinge design clears cables better on race bike drop bars.CONS: 1) Should have included a longer mounting screw. Frustrating to attach or modify without it. 2) Tusitago.com website is non existent.

This is , by far,one of the nicest mounts I have ever seen. It’s not only built extremely well but designed well also. Not only does it give a great mount for a gps but additionally includes a GoPro mount so you can video your trips. I’m extremely happy with the purchase and would highly recommend this mount. Well priced, well made and well engineered. Nice to see a product of this caliber offered at such a super price!Go get one!