ECOSPLAY Latex Rubber Mask Hood with Eye Mouth and Nostril Holes (Large, Black)

Description

Size: Small- Small- Neck around 12 1/2" Head around 20" Medium- Neck around 13 1/2" Head around 23" Large- Neck around 14" Head around 24" These measurements are approximate and can vary slightly. These are unstretched measurements. Please remember latex will stretch roughly 10-15%. Latex clothing is designed to fit like a second skin. Try selecting a size that is an inch or two smaller than your actual size for that tight fit feel. Ultimately, however, it is a matter of personal preference. This product is not recommended for people with latex allergies. Wearing (1) Lightly dust the inside of the garment with talc before putting on (2) Use a silicone-based lubricant to shine. Apply a thin coating to the inside of the garment and your skin if necessary (3) The 3rd method of reducing or eliminating the high friction of latex when dressing is to chlorinate the rubber Rubber can easily be marked or torn with fingernails if excessive force is used when pulling on your garment. Make sure your garment is well lubricated or talced. You may also wish to wear a pair of light cotton gloves to avoid any damage When handling latex with bare hands make sure they are clean before coming into contact with your garment. Never contact with copper, brass or bronze Never expose latex to essential oils Never expose your garment to naked flame and fire as rubber burns Polishing To shine, we recommend you use a silicone based polish, such as 'Eros Bodyglide' or 'Eros Cult Dressing Aid' Never shine using furniture polish and avoid oil-based lubricants and creams Do not rub the outer surface of your garment too hard, or with a rough cloth to avoid scratching Cleaning Wash rubber garments in warm water. Avoid detergents and soaps. Always wipe away excess ater with a soft towel and leave to dry flat or hung up to drip dry